Ice 60 RS

Description

The shell and deck are laminated in infusion from female mould using carbon fibers; the structures always in carbon are laminated on site and also made in infusion, becoming one with hull and deck. The deck, in addition to the classic gluing, benefits from the manual clamping developed throughout the boat, including the bulkheads.

These choices, in addition to containing the weights, give the boat a solidity and robustness able to withstand the repeated stress and heavy loads that are faced even in the most demanding navigation.

ICE 60RS is equipped with a fin made of double Weldox steel with high mechanical characteristics and a numerically controlled milled lead torpedo that offer the advantage of reducing the weight of the ballast and therefore the total displacement of the boat with the same righting moment. The carbon rudder with forged axle in autoclave at 7 bar studied and designed with advanced technologies allows an impressive control even when the boat is skidded or subjected to heavy aerodynamic loads, keeping always clear the attention to safety, central both at design and construction level.

The deck reflects the general lines of Felci Yacht Design projects, combining simplicity and style, elegance and efficiency, comfort and versatility. Following the same philosophy, the sail plan is characterized by a genoa without overlapping, by the absence of flying shrouds and by the attack of the moorings, made in carbon, positioned directly on the hull.

The interiors are foreseen in the 3 or 4 cabins version, with 2 or 3 bathrooms. Carbon fibre, 1500 cm higher than the standard 60, with a high module in order to satisfy the maximum performance of the ICE 60RS.

Technical Data

LOA: 17,99 m.

LWL: 16,80 m.

Bmax: 5,20 m.

Draft: 3,40 m.

DSPL: 18.200 kg.

Ballast: 6.500 kg.

Engine: 150 CV

Water capacity: 1040 LT

Fuel capacity: 670 LT

Sail Area: 240 MQ

Jennaker: 360 MQ

Report Abuse
Categories: , Brand:

Log in with your credentials

or    

Forgot your details?

Create Account